| Model name | GS2110-WTBD-N |
| Overview | 10” Wide, WVGA, TFT color LCD 65536 colors, Panel color: Black, Power supply voltage: 24 V DC |
| Conformance standard | UL cUL CE(EMC) CE(RoHS) KC |
GOT SIMPLE Series
Simple, high functioning, and user friendly model for a reliable system.
GOT SIMPLE collects the data from multiple devices!
GOT SIMPLE manages the data of all connected industrial devices. The data can be collected at an arbitrary timing and can be used for data analysis and feedback.
Use GOT SIMPLE to control industrial devices!
[Multi-channel function]
Up to 2 industrial devices can be controlled with one GOT SIMPLE. The data can be easily transferred between devices with just simple settings in GT Works3.
Sequence programs and parameters can easily be modified at the worksite
[FA transparent function]
The GOT SIMPLE acts as a transparent gateway to enable programming, start up, and adjustment of Mitsubishi Electric industrial devices. Users do not have to bother with changing cable connections.
Basic specifications
| Model |
| Product name |
| Series name |
| Model name |
| GS2110-WTBD-N |
| GS21 model |
| GOT SIMPLE |
| GS21 |
Performance specifications
| Display section*1 | Display device |
| Screen size |
| Resolution |
| Display size |
| Number of displayed characters |
| Display color |
| Brightness adjustment |
| Backlight |
| Backlight color |
| Touch panel*2 | Type |
| Key size |
| Simultaneous press |
| Life |
| Panel color |
| Human sensor | Detection length |
| Detection temperature |
| Memory | Flash memory | Capacity |
| Life (number of write times) |
| Application |
| Built-in interface | RS-232 interface | Number of channel |
| Transmission speed |
| Connector shape |
| RS-422/485 interface | Number of channel |
| Transmission speed |
| Connector shape |
| Terminating resistor |
| RS-422/232 interface | Number of channel |
| Transmission speed |
| Connector shape |
| RS-422 interface | Number of channel |
| Transmission speed |
| Connector shape |
| Terminating resistor |
| Ethernet interface | Number of channel |
| Transmission speed |
| Connector shape |
| Bus interface | Type |
| Number of channel |
| RGB interface |
| Printer interface |
| USB interface (host) | Number of channel |
| Maximum transfer rate |
| Connector shape |
| USB interface (device) | Number of channel |
| Maximum transfer rate |
| Connector shape |
| SD memory card interface |
| CF card interface |
| PC card interface |
| Option function board interface |
| Memory board interface |
| Buzzer output |
| LED specifications | POWER LED |
| Installation method |
| Protective structure*3 |
| External dimensions |
| Panel cut dimensions |
| Weight (excluding a fitting) |
| TFT color LCD |
| |
| WVGA: 800 x 480 dots |
| 222 (W) x 132.5 (H) mm
(8.74 (W) x 5.22 (H) inch)
(Horizontal format) |
| 16-dot standard font: 50 characters x 30 lines (two-byte characters)
12-dot standard font: 66 characters x 40 lines (two-byte characters)
(Horizontal format) |
| 65536 colors |
| 32 levels |
| LED (not replaceable) |
| White |
| Analog resistive film |
| Minimum 2 x 2 dots (per key) |
| Not available (Only 1 point can be touched.) |
| 1 million touches or more (operating force: 0.98 N or less) |
| Black |
| － |
| － |
| Flash memory (Internal) : 15 MB |
| 100000 times |
| for storing project data, OS |
| 1 channel |
| 115200, 57600, 38400, 19200, 9600, 4800 bps |
| D-sub 9-pin (male) |
| 1 channel |
| 115200, 57600, 38400, 19200, 9600, 4800 bps |
| D-sub 9-pin (female) |
| 330 Ω, 110 Ω, OPEN (Selectable by the terminating resistor setting switch.) |
| － |
| － |
| － |
| － |
| － |
| － |
| － |
| 1 channel |
| 100BASE-TX, 10BASE-T |
| RJ45 (modular jack) AUTO MDI/MDI-X |
| － |
| － |
| － |
| － |
| － |
| － |
| － |
| 1 channel (rear face) |
| Full-Speed 12 Mbps |
| USB Mini-B |
| 1 channel, SDHC compliant (maximum 32 GB) |
| － |
| － |
| － |
| － |
| Single tone (LONG/SHORT/OFF adjustable) |
| － |
| Standard |
| Front: IP65F |
| 272 (W) x 214 (H) x 56 (D) mm
(10.71 (W) x 8.43 (H) x 2.21 (D) inch) |
| 258 (W) x 200 (H) mm
(10.16 (W) x 7.88 (H) inch) |
| 1.3 kg |
(*1)Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel. It is impossible to completely avoid this symptom, as the liquid crystal display comprises of a great number of display elements. Flickers and partial discoloration may be generated on the liquid crystal display panel due to individual differences of panels. Please note that these phenomena appear due to its characteristic and are not caused by product defect.
(*2)The touch panel is an analog-resistive type. Simultaneous pressing of two or more areas on the touch panel may activate the switch between those areas. Do not press two or more areas simultaneously on the touch panel.
(*3)Note that this does not guarantee all users' operation environment. In addition, the product may not be used in environments under exposition of oil or chemicals for a long period of time, or in environments filled with oil-mist.
